Removing The Lifter Assembly - Canon NP6045 Service Manual

CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS

2. Removing the Lifter Assembly

1) Open the front door, and slide out the holding tray assembly about 10 cm from the
copier.
2) Remove the rear cover.
3) Remove the waste toner bottle.
4) Remove the rear right grip assembly.
5) Remove the three mounting screws
plate .
6) Disconnect the connector
drive assembly
7-42
COPYRIGHT © 1997 CANON INC.
Figure 7-459
, and remove the three screws
.
Figure 7-460
, and remove the waste toner bottle support
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
; then, remove the lifter