Function (Operation/Inspection Mode); Copier; Copier List - Canon iR6570 Series Portable Manual

5.4 FUNCTION (Operation/Inspection Mode)

5.4.1 COPIER

5.4.1.1 COPIER List

iR5570 / iR6570
<INSTALL>
Sub-item
TONER-S
CARD
E-RDS
RGW-PORT
T-5-32
COPIER > FUNCTION > INSTALL
Description
Use it to stir the toner inside the developing assembly at time of
installation.
Procedure
1. Select the item to highlight.
2. See that the message "Check the developer" is indicated.
At this time, check to see that the developing assembly is correctly
mounted.
3. Press the OK key to start the operation. The operation will
automatically stop after a specific period of time.
during operation, time remaining (sec): at the end, if successful, '0';
if error, '0xFFFF'.
Use it to set up the card reader.
Procedure
Enter the number of a specific card (0 to 2001), and press the OK
key. (As many as 100 cards may be used, starting from the number
you have entered.)
At this time, initialization will take place for card control
information (group ID and ID No.).
Use it to specify the use of E-RDS.
0: off (do not use; default)
1: use RDS (transmit all counter information)
Use it to set the Sales Company server port number used for
embedded-RDS.
settings range: 1 to 6535
Chapter 5
0009-5980
Level
1
1
1
1
5-45