Separation Claw/Separation Claw Drive Assembly; Claw/Separation Drive Assembly From The Drum Unit - Canon NP6045 Service Manual

N. Separation Claw/Separation Claw Drive Assembly
1. Removing the Separation Claw/Separation Drive Assembly from the Drum Unit
1) Remove the process unit from the copier. (See p. 7-17.)
2) Remove the screw
3) Remove the screw
Caution:
1. Take care not to bend the separation claw.
2. Take care not to damage the photosensitive drum.
COPYRIGHT © 1997 CANON INC.
, and remove the No. 2 heat insulting plate
, and remove the claw holder
Figure 4-356
CANON NP6045 REV. 1 MAR. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 4 IMAGE FORMATION SYSTEM
.
.
4-65