Resetting The Environment To Factory Defaults - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Examples
Note
Resetting the Environment to Factory Defaults
Cisco 11000 Series Secure Content Accelerator Configuration Guide
D-8
3.
Stop the text capture.
Before loading the saved configuration file, you must reload the
keys.
Use the following procedures to reset the MiniMax environment to factory
defaults.
1.
Check the environment by entering the following command. An example of
the associated response is included. Note any settings, such as the IP address,
that might be required later.
>>env
cbaud=9600
autoboot=N
autorun=N
verbose=false
netaddr=10.1.2.5
netmask=255.255.255.0
gwaddr=10.1.2.254
bootfile=/flash/maxos.bz2
TZ=GMT10DST
TERM=ansi
FIPS_MODE=0
COLUMNS=80
ROWS=25
bootdevice=/flash/maxos.bz2
build=200208160004
version=4.0.0
2.
Enter resetenv to return the device to factory settings.
Note
You are not prompted to continue. The process begins once
you have types the command and pressed Enter.
Appendix D
MiniMax Command Summary
78-13124-05
Advertisement
Table of Contents
Troubleshooting
