Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual page 223

Appendix C Command Summary
Table C-3
Error
System Call Error Histogram for
Client SSL Connections
78-13124-05
Output Description for show ssl errors (continued)
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Description
Generated with the client connection is
closed; histogram errors include:
"No buffers available"
"Operation timed out"
"Socket is connected"
"Operation not supported"
"Connection aborted"
"Operation would block"
"Connection refused"
"Connection reset by peer"
"Socket not connected"
"Message size error"
"Pipe error"
"EDESTADDRREQ"
"EDESTADDREQ"
"Socket shutdown"
"Unsupported protocol option"
"Out of band data"
"Address is not available"
"Address already in use"
"Address family is not supported"
"Operation already in progress"
"lower error"
"I/O error"
"Destination host is down"
"Unsupported protocol"
"Destination network is down"
"Destination host unreachable"
"Destination network unreachable"
"Protocol Family not supported"
"Prototype error"
Top Level Command Set
C-31