Ip Route - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

Configuration Command Set
Usage Guidelines
Related Commands

ip route

Syntax Description
Usage Guidelines
Related Commands
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-70
Availability: Serial, Telnet; FIPS Mode (serial only)
show ip domain-name (Non-Privileged Command Set)
show ip name-server (Non-Privileged Command Set)
ip domain-name (Configuration Command Set)
Adds a static route entry for the specified destination IP address to the device
routing table.
ip route <destip> <mask> <gatewayip> [metric <hops>]
no ip route <destip>
destip
mask
gatewayip
metric
hops
Availability: Serial, Telnet; FIPS Mode (serial only)
Use the no form of the command to delete the specified static route entry from the
device's routing table.
show ip routes (Non-Privileged Command Set)
show route (Non-Privileged Command Set)
The destination IP address.
The netmask appropriate to the destination IP address.
The next-hop router address for the destination IP
address.
Specifies the total number of hops to the destination IP
address
The number of hops to the destination IP address.
Appendix C Command Summary
78-13124-05