Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual page 413

Appendix F SSL Introduction
•
Additionally, we provide a guided QuickStart wizard configuration method,
available from both the configuration manager and GUI. To use this method for
configuration, see Chapter 3. Brief instructions are also included for initiating a
management session using the configuration manager.
For instructions on using telnet or serial console CLI configuration managers, see
Chapter 4; for instructions on using the GUI, see Chapter 5. To use the Secure
Content Accelerator in FIPS-compliant operation mode, see Chapter 6.
78-13124-05
tftp:—Use this format:
tftp://host/filename
where the hostname may be either a URL or IP address
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Cisco Secure Content Accelerator Management
F-13