Administrative Time Out; Web Management User Interface - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

Chapter 5 Graphical User Interface Reference
Note

Administrative Time Out

Web Management User Interface

78-13124-05
Type https:// and the IP address of the device in the Address text box of the
browser, and press Enter. You receive a security alert dialog. Click Yes to
proceed. If prompted, indicate that you wish to accept the certificate for this
session only. You can proceed with configurations. You can also use the
Subsystem tab in the Access content area to configure port access. Click the
HTTPS Service Enable check box.
Do not create an SSL server pointing to the IP address of 127.0.0.1
and try to enable HTTPS access on the Subsystem tab in the Access
content area
If the device senses no activity on a GUI management session for a certain period
of time, the user is logged out of the device. The default idle timeout period is
15 minutes. This value can be reset using the Passwords tab of the Access content
area. See "Setting the Idle-Timeout" section on page 4-31 for an example using
the CLI configuration manager.
The GUI is divided into two main parts: the area panel on the left and content tabs
on the right. Figure 5-2 shows an example of this interface. Take a few moments
to familiarize yourself with the screen layout.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Administrative Time Out
5-5