Telnet - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

Initiating a Management Session
Note

Telnet

Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-10
When prompted to supply a file name during serial management,
you must supply it as a URL in the form of
HOST/PATH/FILENAME using the http://, https://, ftp://, or tftp://
prefix.
After you have assigned an IP address to the Cisco Secure Content Accelerator
using the serial connection configuration manager, you can connect to the
appliance via telnet.
Initiate a telnet session with the IP address previously assigned to the
1.
appliance.
An SCA> prompt is displayed.
2.
When prompted to supply a file name during a telnet
Note
management session, you must supply it as a URL in the
form of HOST/PATH/FILENAME using the http://, https://,
ftp://, or tftp:// prefix.
Appendix C Command Summary
78-13124-05