Figure 5-28 Add Secure Server Information Example - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

Chapter 5 Graphical User Interface Reference

Figure 5-28 Add Secure Server Information Example

18.
19.
20.
78-13124-05
Choose the type of secure server to create by clicking the appropriate option
button. (This example configures a Normal Server.) Type the server name,
myServer, in the Secure Server Name text box. Type the IP address of the
server to which to send decrypted SSL traffic in the IP Address text box.
Change the Clear-Text Port to "81".
If you wish to use a log server, enter the appropriate information in the Log
Server IP text boxes.
You can disable any of the SSL/TLS versions by clearing your choice in the
SSL Version Support check boxes.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
SSL Configuration Examples
5-31