Sslport; Sslv2 Enable - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

Appendix C Command Summary

sslport

Syntax Description
Usage Guidelines
Related Commands

sslv2 enable

Usage Guidelines
78-13124-05
Specifies the port on which the logical secure server receives SSL traffic. The SSL
traffic is decrypted and sent to the physical server using the TCP service port
previously specified with the remoteport command.
sslport <port|default>
port
default
Availability: Serial, Telnet; FIPS Mode (serial only)
This command has the same effects as the localport
Note
command and is included only for backwards compatibility.
localport (Server Configuration Command Set)
remoteport (Server Configuration Command Set)
Enables SSL version 2 protocols.
sslv2 enable
no sslv2 enable
Availability: Serial, Telnet
Using the no form of the command disables SSL version 2 protocols. You cannot
disable SSL version 2 and 3 and TLS protocols. This command is not available in
FIPS mode.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
The TCP service port through which SSL traffic is
received by the current secure logical server.
Returns the setting to the default of 443.
Configuration Command Set
C-161