Example: Working With Syslogs; Figure 5-9 Syslog Configuration Example - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

Chapter 5 Graphical User Interface Reference

Example: Working with Syslogs

78-13124-05
5. Type the addressing and gateway information in the appropriate text boxes.
Type the number of hops into the Metric text box.
6. Click OK to add the route or Cancel to close the window without adding the
route information.
1. Click Log to activate the Log tabs. The Settings page open automatically, as
shown in Figure 5-9.
Figure 5-9 Syslog Configuration Example
2. Enter the IP addresses of the syslog hosts in the System Log Forwarding text
boxes on the Settings tab.
Enter the appropriate port ID, and select the desired facility from the Facility
3.
drop-down list box.
Click Update.
4.
Use the View Log tab to display the syslog and clear the syslogs.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
General Configuration Examples
5-13