Key - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

Appendix C Command Summary
Usage Guidelines
Related Commands

key

Syntax Description
Usage Guidelines
78-13124-05
prefix
prefixText
url
Availability: Serial, Telnet; FIPS Mode (serial only)
If you do not specify a URL, you are prompted for it.
import pkcs12 (SSL Command Set)
show ssl cert (Non-Privileged Command Set)
show ssl certgroup (Non-Privileged Command Set)
Creates and/or configures the specified key object.
key <keyname> [create]
no key <keyname>
keyname
create
Availability: Serial, Telnet; FIPS Mode (serial only)
The no form of the command is used to remove a key. You cannot delete a key
referenced by a server. A device can have up to 255 (SCA) or 4095 (SCA2) key
objects. Key names can consist of Arabic numerals and upper- and lowercase
alphabetic, underscore (_), hyphen (-), and period (.) characters. Key names must
begin with an alphabetic character or underscore and have a limit of 15 characters.
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Indicates a prefix should be used when naming
certificate objects.
The prefix used for the certificate names in the chain.
The location of the file.
The name of the key.
Creates a new key association named keyname and
enters Key Configuration mode for that object.
Configuration Command Set
C-99