Suspend; Tcp-Tuning - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

Appendix C Command Summary
Related Commands

suspend

Syntax Description
Usage Guidelines
Related Commands

tcp-tuning

78-13124-05
sslv2 enable(Backend Server Configuration Command Set)
tlsv1 enable (Backend Server Configuration Command Set)
Suspends the function of the backend server.
suspend [now]
now
Availability: Serial, Telnet; FIPS Mode (serial only)
This command behaves in three ways:
• If you are creating a new backend server and you use the suspend command,
the server is created in the suspended state. No connections are accepted until
the activate command is used.
If you are editing an existing backend server and you use the suspend
•
command alone, the all open connections on the server are finished, and no
new connections are accepted. No connections are accepted until the activate
command is used.
If you are editing an existing backend server and you use the suspend now
•
command, all connections are suspended. When the end command is entered,
the current backend server is removed, and a new suspended backend server
is created.
activate (Backend Server Configuration Mode)
Enters TCP Tuning Configuration mode at for this server.
tcp-tuning
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Suspends actions of the backend server immediately.
Configuration Command Set
C-115