Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual page 313

Appendix C Command Summary
Usage Guidelines
Related Commands
78-13124-05
Availability: Serial, Telnet; FIPS Mode (serial only)
After the command is entered, you are prompted to paste a certificate from the cut
buffer. You can use a text editor to copy the certificate from a file. After the
certificate is pasted, you must press Enter twice to complete the command. If a
password is required, you are prompted for it.
pem (Certificate Configuration Command Set)
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Configuration Command Set
C-121