Use With The Css; Figure B-2 Secure Content Accelerator Installation With A Load Balancer - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

Appendix B Deployment Examples

Use with the CSS

78-13124-05
Figure B-2 Secure Content Accelerator Installation with a Load Balancer
Install the appliance as instructed previously.
1.
2. Connect the "Network" Ethernet interface to the Internet. Connect the
"Server" Ethernet interface to the load balancer.
For information about configuring the Secure Content Accelerator in conjunction
with the CSS 11000 Series Content Services Switch (hereinafter referred to as the
CSS), see "Use with the CSS".
Using the Secure Content Accelerator with the CSS allows Layer 4 load balancing
of the Secure Content Accelerator and Layer 5 routing and load balancing for
content decrypted by the Secure Content Accelerator. Four deployment scenarios
are recommended:
In-Line
•
Transparent Sandwich
•
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Use with the CSS
B-3