Serverauth Enable; Serverauth Ignore - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

Appendix C Command Summary

serverauth enable

Usage Guidelines
Related Commands

serverauth ignore

Syntax Description
Usage Guidelines
78-13124-05
Enables server certificate authentication.
serverauth enable
no serverauth enable
Availability: Serial, Telnet; FIPS Mode (serial only)
certgroup serverauth (Reverse-Proxy Configuration Command Set)
serverauth ignore (Reverse-Proxy Server Configuration Command Set)
Specifies the server authentication errors to ignore.
serverauth ignore <all | none|signature-failure|expired-date|
cert-not-yet-valid|invalid-ca|domain-name>
no serverauth ignore< all | none|signature-failure|expired-date|
cert-not-yet-valid|invalid-ca|domain-name>
all
none
signature-failure
expired-date
cert-not-yet-valid
invalid-ca
domain-name
Availability: Serial, Telnet; FIPS Mode (serial only)
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Ignore all server authentication errors.
Do not ignore server authentication errors.
Ignore certificate signature failure errors.
Ignore certificate expiration errors.
Ignore errors caused by using the certificate before it
is valid.
Ignore errors caused by an unrecognized CA.
Ignore errors due to an invalid domain name.
Configuration Command Set
C-135