Show Environment - Cisco NCS 1004 Command Reference Manual

show environment

show environment
To display environmental monitor parameters for the system, use the show environment command in
administration EXEC mode.
show environment [ all | fan | power | voltages | current | trace | temperatures ] [
location | location ]
Syntax Description
all
fan
power
voltages
current
temperatures
trace
location | location
All environmental monitor parameters are displayed.
Command Default
Administration EXEC
Command Modes
Command History
Release
Release
7.0.1
The show environment command displays information about the hardware that is installed in the system,
Usage Guidelines
including fans, power supply voltage, current information, and temperatures.
Example
The following example shows sample output from the show environment command with the fan
keyword.
sysadmin-vm:0_RP0# show environment fan
Wed Mar
=============================================
Location
---------------------------------------------
0/FT0
0/FT1
0/FT2
Command Reference for Cisco NCS 1004
84
(Optional) Displays information for all the environmental monitor parameters.
(Optional) Displays information about the fans.
(Optional) Displays power supply voltage and current information.
(Optional) Displays system voltage information.
(Optional) Displays current sensor information.
(Optional) Displays system temperature information.
(Optional) Displays trace data for environment monitoring.
(Optional) Enter the location for which the environmental information needs to be
displayed.
Modification
This command was introduced.
20 04:40:02.510 UTC+00:00
Fan speed (rpm)
FRU Type FAN_0
NCS1K4-FAN
NCS1K4-FAN
NCS1K4-FAN
FAN_1
7020 6960
6750 6720
6750 6720
Commands