Getting Help - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual

Appendix D MiniMax Command Summary

Getting Help

78-13124-05
Help is available at any time in the MiniMax environment. Simply enter help or
? (question mark) at the MiniMax prompt. An example of the output is shown
below.
>>help
? --
baud --
boot --
cat --
do --
eaddr --
env --
help --
hinv --
ifconfig --
ip --
ls --
netstat --
printenv --
rdate-server --
reboot --
resetenv --
rm --
sbridge --
show --
version --
zap --
>>
Help for individual commands having arguments is available by partially typing
the command and pressing Enter. An example is below.
>>ip
ip what?
address -- assign an ip address
route -- assign default route
>>
Cisco 11000 Series Secure Content Accelerator Configuration Guide
show this screen
change baud rate
boot flash image
display contents of file
download file via xmodem
set/get ethernet addresses on ports
print nvram environment
show this screen
display hardware inventory
configured network interfaces
change ip settings
list flash file directory...
show open file descriptors and sockets
print nvram environment
assign rdate server
reboot minimax...
reset environment to factory defaults
delete flash file
add an ethernet port and start the bridge
show system information
show versions of firmware
zap downloaded file to flash (autotype)
Getting Help
D-3