Session-Cache Timeout; Sslv2 Enable - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Appendix C
Command Summary
Related Commands
session-cache timeout
Syntax Description
Usage Guidelines
Related Commands
sslv2 enable
Usage Guidelines
Related Commands
78-13124-05
session-cache enable (Reverse-Proxy Server Configuration Mode)
session-cache timeout (Reverse-Proxy Server Configuration Mode)
Specifies the session cache length before being timed out.
session-cache timeout <seconds>
seconds
Availability: Serial, Telnet; FIPS Mode (serial only)
session-cache enable (Reverse-Proxy Server Configuration Mode)
session-cache size (Reverse-Proxy Server Configuration Mode)
Enables SSL version 2 protocols.
sslv2 enable
no sslv2 enable
Availability: Serial, Telnet
Using the no form of the command disables SSL version 2 protocols. You cannot
disable SSL version 2 and 3 and TLS protocols. This command is not available in
FIPS mode.
sslv3 enable(Reverse-Proxy Server Configuration Command Set)
tlsv1 enable (Reverse-Proxy Server Configuration Command Set)
Cisco 11000 Series Secure Content Accelerator Configuration Guide
Specifies the number of seconds before the cache
times out.
Configuration Command Set
C-137
Advertisement
Table of Contents
Troubleshooting
