C-11 Hot-Plug Scsi Hard Drive Led Combinations - HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual

System LEDs and Switches
Table C-11: Hot-Plug SCSI Hard Drive LED Combinations
Activity Online
LED LED
On Off
On Flashing
Flashing Flashing
Off Off
C-16
Fault State
LED
Off
Do not remove the drive. Removing a drive during this
process causes data loss.
The drive is being accessed and is not configured as part of an
array.
Off
Do not remove the drive. Removing a drive during this
process causes data loss.
The drive is rebuilding or undergoing capacity expansion.
Flashing
Do not remove the drive. Removing a drive during this
process causes data loss.
The drive is part of an array being selected by the Array
Configuration Utility.
-Or-
The Options ROMPaq is upgrading the drive.
Off OK to replace the drive online if a predictive failure alert is
received and the drive is attached to an array controller.
The drive is not configured as part of an array.
-Or-
If this drive is part of an array, a powered-on controller is not
accessing the drive.
-Or-
The drive is configured as an online spare.
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
continued