HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual page 146

5. When the new expansion board is detected, NCMCON automatically asks if you
want to configure and apply power to the slot:
— If you answer "Yes," power is applied to the slot, the green LED illuminates,
and the status of the slot on the console changes to READY.
— If you answer "No," the console status does not change.
6. Press the Enter key to go to the Slot Options menu.
7. Use the arrow keys to highlight Replace Adapter and press the Enter key.
NCMCON processes the replace request.
Adding an Expansion Board
To add an expansion board:
1. From the Main menu, highlight the slot into which the expansion board is to be
added.
2. Press the Enter key to go to the Slot Options menu.
3. Use the arrow keys to highlight Add Adapter and press the Enter key.
NCMCON then processes the request.
4. Be sure that the slot has a status of POWERED down and the green LED is no
longer illuminated.
5. Install the new expansion board in the slot.
6. Close the expansion slot latch.
7. When the new expansion board is detected, NCMCON automatically asks if you
want to configure and apply power to the slot.
— If you answer "Yes," power is applied to the slot, the green LED illuminates,
and the status of the slot changes to READY.
— If you answer "No," the console status does not change.
8. Press the Enter key to go to the Slot Options menu.
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
PCI-X Technology
4-25