Installing Hardware Options
13. Lower the processor retaining bracket into position over the processor and
PPM (1) and secure it by tightening the thumbscrew (2).
CAUTION: Before closing the processor retaining bracket, be sure that the
processor locking lever is closed. Forcing the bracket shut may damage
the processor or the processor socket.
Figure 3-22: Securing the processor retaining bracket
14. Repeat steps 7 through 13 to upgrade the second processor, if installed.
15. If necessary, reinstall the memory board. For more detailed information about
installing a memory board, refer to the server memory installation guide on the
Documentation CD.
3-28
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide