Standard Cable Routing Of An External Storage Device Through The Vhdci Scsi Connector - HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual

IMPORTANT: The ProLiant ML530 Generation 2 server ships with the drive cages cabled
internally to SCSI connectors A and B.
If you want to cable a SCSI device to SCSI connector A or B using the internal-to-external
SCSI cable assembly, you must first disconnect the appropriate drive cage cable. Once you
have disconnected a drive cage cable, you must cable it to a controller board to retain use of
that drive cage.
The following illustration shows a rack server cabled to an external storage device
through the optional VHDCI SCSI connector.
Figure 7-8: Standard cable routing of an external
storage device through the VHDCI SCSI connector
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
Cabling the Server
7-13