Locating The System Battery; Removing The Battery - HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual
Generation 2 server
Hide thumbs
Also See for ML530 - ProLiant - 128 MB RAM:
- Quickspecs (43 pages) ,
- Brief manual (14 pages) ,
- Installation instructions (2 pages)
Table of Contents
Advertisement
System Battery
2. Remove the access panel. See "Removing the Access Panel" in Chapter 3,
"Installing Hardware Options."
3. Locate the battery connector on the system board.
Figure F-1: Locating the system battery
4. Remove the existing battery and note which side is positive.
Figure F-2: Removing the battery
F-2
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
Advertisement
Table of Contents
Troubleshooting
