Connecting The Power Cord And Peripheral Devices - HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual

Installing the Rack Server

Connecting the Power Cord and Peripheral Devices

After the server has been installed in the rack, connect the power cord and peripheral
devices to the connectors located on the rear panel of the server. Icons on the back of
the server identify the function of each connector.
WARNING: To reduce the risk of electrical shock or fire, do not plug
telecommunications/telephone cables into the NIC connectors.
IMPORTANT: If the Remote Insight Lights-Out Edition is installed in your server, be sure that
you connect your video cable into the video connector on the rear of the Remote Insight
Lights-Out Edition expansion board. The standard video connector on the server rear panel is
not used when the Remote Insight Lights-Out Edition is installed. For more information, refer to
the documentation that ships with the Remote Insight Lights-Out Edition option kit.
5-22 HP ProLiant ML530 Generation 2 Server Setup and Installation Guide