HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual page 266

Table D-5: Is the Internal Health LED Green?
Answer Possible Reasons
No, it is red A processor has failed.
Processor 1 is not installed.
A processor is an unsupported
type.
Processor voltage requirements are
mismatched.
Processor does not have an
associated PPM installed.
A PPM has failed.
A DIMM has experienced a multibit
error.
DIMM pairs have
mismatched DIMMs.
DIMMs are missing.
DIMMs are an unsupported type.
A required fan has failed.
A thermal event has occurred.
A component is not properly
seated.
Memory board is missing.
Yes If the internal health LED is green, see Table D-6.
Note: For LED locations and functions, see Appendix C, "System LEDs and Switches."
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
continued
Possible Solutions
Use internal component failure LEDs to
identify:
•
Missing components
•
Failed components
•
Improperly installed components
•
Thermal event
For corrective procedures, see the
Maintenance and Service Guide on the
Documentation CD that ships with your
server.
Contact an HP authorized service provider
for replacement parts and service.
Be sure that all components are seated
securely.
Add memory board.
Troubleshooting
D-9