Removing The Processor Air Baffle - HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual

5. Remove the processor air baffle:
a. Loosen the two thumbscrews that secure the air baffle to the server tray (1).
b. Lift the air baffle upward out of the server (2).
Figure 3-16: Removing the processor air baffle
6. If necessary, remove the memory board to gain access to the processor. For
detailed information on removing a memory board, refer to the server memory
installation guide on the Documentation CD.
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
Installing Hardware Options
3-23