Saving Rbsu Configuration Settings; Using Rbsu - HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual

Saving RBSU Configuration Settings

RBSU automatically saves settings when you press the Enter key. The utility does
not prompt you for confirmation of settings before you exit the utility. To change a
selected setting, you must select a different setting and press the Enter key.

Using RBSU

RBSU does not run automatically. The first time you power up the server, the system
defaults to Windows 2000 and waits temporarily so you can select a different
operating system by using RBSU. Press the F9 key to enter RBSU. While you are in
RBSU, press any key to return to the RBSU main menu, or exit RBSU by pressing
the Esc key, then pressing the F10 key at the prompt.
NOTE: Most of the features in RBSU are not required in the setup of your server. The options
in this utility are designed to assist with specific server configuration issues.
RBSU is divided into a series of menu selections designed to configure specific areas
of the system. The primary menus are as follows:
•
System Options
•
PCI Devices
•
Standard Boot Order (IPL)
•
Boot Controller Order
•
Date and Time
•
Automatic Server Recovery
•
Server Passwords
•
Server Asset Text
•
Advanced Options
•
Utility Language
For a complete explanation of RBSU features and functions, refer to the ROM-Based
Setup Utility User Guide on the Documentation CD.
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
Server Configuration and Utilities
8-3