Installing Hardware Options
Hot-Plug Fan
The ProLiant ML530 Generation 2 server enables you to install up to two CPU hot-
plug fans and two I/O hot-plug fans. CPU fans provide cooling for the processors,
while I/O fans cool other system components.
To install a redundant hot-plug fan:
1. Remove the access panel. See "Removing the Access Panel" in this chapter.
2. Install the hot-plug fan:
a. Locate the fan bay where you want to install the redundant fan.
Figure 3-24: CPU and I/O hot-plug fan bays (view from
the front panel looking down)
Table 3-5: CPU and I/O Hot-Plug Fan Locations
Item
1
2
3-30
CPU Fan
Standard CPU hot-plug
fan
Optional redundant
CPU hot-plug fan
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
Item
I/O Fan
3
Standard I/O hot-plug
fan
4
Optional redundant I/O
hot-plug fan