Installing A Dvd Drive In The Cd-Rom Drive Bay - HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual

Installing the DVD Drive in the CD-ROM Drive Bay
To install a DVD drive in place of the CD-ROM drive:
1. Remove the CD-ROM drive. See "Removing the CD-ROM Drive to Install a
DVD Drive" in this chapter.
2. Insert the DVD drive into the front of the chassis (1).
3. Slide the metal locking bracket toward the fans (2).
4. Tighten the thumbscrew near the bottom of the CPU fan basket (3).
Figure 3-59: Installing a DVD drive in the CD-ROM
drive bay
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
Installing Hardware Options
3-71