Compliance with International Regulations
All HP systems equipped with laser devices comply with appropriate safety standards
including IEC 825.
Laser Product Label
The following label or equivalent is located on the surface of the HP supplied laser
device.
Laser Information
Laser Type
Wave Length
Divergence Angle
Output Power
Polarization
Numerical Aperture
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
Regulatory Compliance Notices
This label indicates that the
product is classified as a CLASS
1 LASER PRODUCT. This label
appears on a laser device
installed in your product.
Semiconductor GaAIAs
780 nm +/- 35 nm
53.5 degrees +/- 0.5 degrees
Less than 0.2 mW or 10,869 W·m-2 sr-1
Circular 0.25
0.45 inches +/- 0.04 inches
A-7