Installing The Hot-Plug Power Supply - HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual

4. Install the redundant hot-plug power supply:
a. Press down on the port-colored button (1) and pull down the hot-plug power
supply handle until it is in the fully horizontal position (2).
b. Slide the hot-plug power supply into the bay (3).
c. Push up the hot-plug power supply handle until the button locks into
place (4).
Figure 3-39: Installing the hot-plug power supply
IMPORTANT: The power supplies are designed to fit only one way into the power supply
bays. Do not force the power supplies into the power supply bays. If the power supply does not
seat properly, be sure that it is oriented correctly and that it is 600-W power supply. 600-W
power supplies have carbon-colored (black) handles.
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
Installing Hardware Options
3-49