Installing Hardware Options
2. Remove the drive blank from the next available hot-plug drive bay:
a. Push the retaining clip inward to unlock the drive blank (1).
b. Grasp the drive blank by the front handle.
c. Slide the drive blank out of the hot-plug hard drive bay (2).
Figure 3-46: Removing the drive blank from the next
available hot-plug hard drive bay
3. HP hot-plug universal tape drives require two drive bays for installation, so you
must remove two drive blanks. Repeat step 2 to remove a second drive blank.
3-58
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide