C-5 Pci-X Expansion Slot Leds - HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual

Use the following table to identify PCI-X Hot Plug slot activity status according to
LED description.
Table C-5: PCI-X Expansion Slot LEDs
LED State
Power On
Fault Off
Power On
Fault On
Power Flashing
Fault On or off
Power Off
Fault On
Power Off
Fault Off
Note: If the any of the LEDs indicates an error, see Appendix D, "Troubleshooting," for more
information.
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
OK to Slot Status
Open
No Power is currently applied to the slot. Do NOT
open the expansion slot latch. The slot is
functioning normally.
No Power is currently applied to this slot, but the
slot needs ATTENTION for a possible problem
with the slot, expansion board, or driver. Do
NOT open the expansion slot latch.
No The power slot is being turned off or on, which
may take several minutes. Do NOT open the
expansion slot latch. Press the PCI-X Hot Plug
button to cancel the operation.
Yes Power to this slot is turned off, but this slot
needs ATTENTION. There may be a problem
with the slot, expansion board, or driver.
Yes The power to the slot is off. An expansion
board may be installed in this slot.
System LEDs and Switches
C-7