Embedded Network Interface Controller; Scsi Support - HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual

Server Features

Embedded Network Interface Controller

The standard network interface controller (NIC) provided with your ProLiant ML530
Generation 2 server is an NC3163 Embedded 10/100 Fast Ethernet NIC with the
following features:
•
Dual 10/100 MB/s data transfer rate
•
Preboot eXecution Environment (PXE) support
•
Wake On LAN (WOL) support
•
Autosensing LAN capable at either 10 or 100 MBps
•
Full-duplex Ethernet for two-way transmission

SCSI Support

HP ProLiant ML530 Generation 2 servers provide support for both internal and
external SCSI devices.
•
Integrated SCSI controller
HP ProLiant ML530 Generation 2 servers provide a Dual Channel Integrated
Ultra3 SCSI controller.
•
SCSI drive cages
HP ProLiant ML530 Generation 2 servers ship with two internal six-bay drive
cages. Each cage supports Ultra3 or Ultra4 SCSI hot-plug hard drives.
•
Optional internal two-bay hot-plug SCSI drive cage
The removable media bay in the ProLiant ML530 Generation 2 server supports
the installation of an optional internal two-bay hot-plug SCSI drive cage, which
provides space for up to two additional hot-plug hard drives.
•
Internal-to-external SCSI cable assembly
HP ProLiant ML530 Generation 2 servers ship with an internal-to-external SCSI
connector and cable. The cable can be connected to one of the SCSI connectors
on the system board, enabling you to connect external SCSI devices through the
VHDCI SCSI connector on the rear panel of the server.
1-6 HP ProLiant ML530 Generation 2 Server Setup and Installation Guide