HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual page 48

Installing Hardware Options
The following warnings apply to all procedures:
WARNING: To reduce the risk of personal injury or damage to the equipment:
•
•
•
•
CAUTION: Electrostatic discharge can damage electronic components. Be sure you
are properly grounded before beginning any installation procedures.
The following warnings apply to in-rack operations only:
WARNING: Always begin by mounting the heaviest item on the bottom of the
rack. Continue to populate the rack from the bottom to the top.
WARNING: To reduce the risk of personal injury or equipment damage, always
be sure that the rack is adequately stabilized before extending a component
outside the rack. A rack may become unstable if more than one component is
extended for any reason. Extend only one component at a time.
3-2
WARNING: The server is very heavy, up to 66 kg (146 lb). To reduce
the risk of personal injury or damage to the equipment:
•
Remove all hot-plug power supplies to reduce the weight of the
server before lifting it.
•
Observe local occupational health and safety requirements and
guidelines for material handling.
•
Get help to lift and maneuver the server.
•
Be sure the server casters are locked in place on tower models.
Heed all warnings and cautions throughout the installation instructions.
Allow internal system components to cool before touching any surfaces.
Be sure that the power to the server is turned off and that all power cords
are disconnected.
Allow only qualified service personnel—those trained to work with
products capable of producing hazardous energy levels—to install options,
except when installing hot-plug power supplies or hard drives.
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide