Installing The Hp Universal Hot-Plug Tape Drive - HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual

4. Align the hot-plug universal tape drive with the drive bays and slide the tape
drive into the drive bays until the release latch snaps into place.
Figure 3-47: Installing the HP universal hot-plug tape
drive
5. Be sure that the tape drive LED on the front of the tape drive is illuminated
green, indicating that the system is functioning properly. For detailed information
on LEDs, see Appendix C, "System LEDs and Switches."
6. If any of the LEDs indicates an error, see Appendix D, "Troubleshooting," or
refer to the troubleshooting guide for instructions.
For more information regarding installing the HP hot-plug universal tape drive, refer
to the installation documentation provided with the drive.
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
Installing Hardware Options
3-59