Removing The Drive Air Baffle; Disconnecting Cables From The Cd-Rom Drive - HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual

6. Remove the drive air baffle:
a. Loosen the two thumbscrews securing the drive air baffle in place (1).
b. Remove the drive air baffle from the server (2).
Figure 3-56: Removing the drive air baffle
7. Disconnect the power and signal cables from the CD-ROM drive.
Figure 3-57: Disconnecting cables from the CD-ROM
drive
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide
Installing Hardware Options
3-69