Removing The Power Supplies; Server Power Supplies; Power Supply Locations - HP ML530 - ProLiant - 128 MB RAM Setup And Installation Manual

Installing the Rack Server

Removing the Power Supplies

To make moving and lifting the server more manageable, HP recommends that all
power supplies be removed from the server.
To remove the power supplies:
1. Locate the power supplies on the rear of the server under the system tray.
Figure 5-7: Server power supplies
Table 5-1: Power Supply Locations
Item
1
2
3
*Improved power supply performance ensures that a single power supply
provides sufficient power to the entire system. Complete redundancy can be
achieved by installing only one additional power supply.
5-12
Power Supply
Hot-plug power supply 1
Hot-plug power supply bay 2 (redundant)
Hot-plug power supply bay 3 (not used)*
HP ProLiant ML530 Generation 2 Server Setup and Installation Guide