Compliance with International Regulations
All systems equipped with laser devices comply with appropriate safety standards
including IEC 825.
Laser Product Label
The following label or equivalent is located on the surface of the supplied laser
device.
Laser Information
Laser Type
Wave Length
Divergence Angle
Output Power
Polarization
Numerical Aperture
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
This label indicates that the product is
classified as a CLASS 1 LASER PRODUCT.
This label appears on a laser device installed
in your product.
Semiconductor GaAIAs
780 nm +/- 35 nm
53.5 degrees +/- 0.5 degrees
Less than 0.2 mW or 10,869 W·m-2 sr-1
Circular 0.25
0.45 inches +/- 0.04 inches
Regulatory Compliance Notices
A-7