German Ergonomics Notice; Laser Safety; Cdrh Regulations; Compliance With International Regulations - HP t5300 - Thin Client Safety And Regulatory Information Manual

Agency Notices

German Ergonomics Notice

Laser Safety

Å

CDRH Regulations

Compliance with International Regulations

1–6
HP Compaq t5000 Series products products, when combined with HP
Brand keyboards and monitors that bear the "GS" approval mark,
meet the requirements of ZH 1/618 (German Safety Regulations for
Display Work Places in the Office Sector). The installation guides
included with the monitor provide configuration information.
All HP systems equipped with a laser device comply with safety
standards, including International Electrotechnical Commission
(IEC) 825. With specific regard to the laser, the equipment complies
with laser product performance standards set by government agencies
as a Class 1 laser product. The product does not emit hazardous light;
the beam is totally enclosed during all modes of customer operation
and maintenance.
WARNING: To reduce the risk of exposure to hazardous radiation:
Do not try to open the laser device enclosure. There are no
user-serviceable components inside.
Do not operate controls, make adjustments, or perform procedures to
the laser device other than those specified herein.
Allow only authorized HP service providers to repair the laser device.
The Center for Devices and Radiological Health (CDRH) of the U.S.
Food and Drug Administration implemented regulations for laser
products on August 2, 1976. These regulations apply to laser products
manufactured from August 1, 1976. Compliance is mandatory for
products marketed in the United States.
All systems equipped with CD-ROM drives comply with appropriate
safety standards including IEC 825.
www.hp.com Safety & Regulatory Information