Compliance With International Regulations; Laser Product Label; Laser Information; Battery Replacement Notice - HP ML570 - ProLiant - G2 Setup And Installation Manual

Compliance with International Regulations

All HP systems equipped with laser devices comply with appropriate safety standards
including IEC 825.

Laser Product Label

The following label or equivalent is located on the surface of the HP supplied laser
device.

Laser Information

Laser Type
Wave Length
Divergence Angle
Output Power
Polarization
Numerical Aperture

Battery Replacement Notice

The server is provided with an internal lithium battery. There is a danger of explosion
and risk of personal injury if the battery is incorrectly replaced or mistreated. Follow
battery installation procedures carefully and adhere to all warnings and cautions
associated with the installation.
HP ProLiant ML570 Generation 2 Server Setup and Installation Guide
Regulatory Compliance Notices
This label indicates that the
product is classified as a CLASS
1 LASER PRODUCT. This label
appears on a laser device
installed in your product.
Semiconductor GaAIAs
780 nm +/- 35 nm
53.5 degrees +/- 0.5 degrees
Less than 0.2 mW or 10,869 W·m-2 sr-1
Circular 0.25
0.45 inches +/- 0.04 inches
A-7