Lag Configuration Table; Lag Configuration Cli Commands - Dell PowerConnect 5324 User Manual

Figure 7-91. LAG Configuration Table
Configuring LAGs with CLI Commands
The following table summarizes the equivalent CLI commands for configuring LAGs as displayed
in the LAG Configuration page.
Table 7-54. LAG Configuration CLI Commands
CLI Command
interface port-channel port-
channel-number
description string
shutdown
speed bps
autobaud
negotiation
back-pressure
Description
Enters the interface configuration mode of a
specific port-channel.
Adds a description to an interface
configuration.
Disables interfaces that are part of the
currently set context.
Configures the speed of a given ethernet
interface when not using auto negotiation.
Sets the line for automatic baud rate
detection .
Enables auto negotiation operation for the
speed and duplex parameters of a given
interface.
Enables Back Pressure on a given interface
Configuring Device Information
223