Configuring Port Based Authentication
The Port Based Authentication page contains fields for configuring port based authentication. To
open the Port Based Authentication page, click Switch
Authentication.
Figure 7-80. Port Based Authentication
Port Based Authentication State — Permits port based authentication on the device. The possible
field values are:
Enable — Enables port based authentication on the device.
Disable — Disables port based authentication on the device.
Authentication Method — The Authentication method used. The possible field values are:
None — No authentication method is used to authenticate the port.
RADIUS — Port authentication is performed using the RADIUS server.
RADIUS, None — Port authentication is performed first using the RADIUS server. If the port
is not authenticated, then no authentication method is used, and the session is permitted.
Interface — Contains an interface list.
User Name — The user name as configured in the RADIUS server.
Admin Interface Control — Defines the port authorization state. The possible field values are:
Authorized — Set the interface state to authorized (permit traffic).
Network Security
Port Based
Configuring Device Information
199