General Settings; General Settings Cli Commands - Dell PowerConnect 5324 User Manual

Figure 6-79. General Settings
Attribute — The general setting attribute.
Current — The currently configured value.
After Reset — The future (after reset) value. By entering a value in the After Reset column,
memory is allocated to the field table.
Max RAM Log Entries (20-400) — The maximum number of RAM Log entries. When the Log
entries are full, the log is cleared and the Log file is restarted.
Jumbo Frames — Enables or disables the Jumbo Frames feature. Jumbo Frames enable the
transportation of identical data in fewer frames. This ensures less overhead, lower processing time,
and fewer interrupts.
Viewing RAM Log Entries Counter Using the CLI Commands
The following table summarizes the equivalent CLI commands for setting fields displayed in the
General Settings page.
Table 6-48. General Settings CLI Commands
CLI Command
logging buffered size number Sets the number of syslog messages stored in the
port jumbo-frame
194
Configuring System Information
Description
internal buffer (RAM).
Enables jumbo frames for the device.