Viewing Rmon History Control Statistics; Rmon History Control - Dell PowerConnect 5324 User Manual

Viewing RMON History Control Statistics

The RMON History Control page contains information about samples of data taken from ports.
For example, the samples may include interface definitions or polling periods. To open the RMON
History Control page, click Statistics/RMON History Control in the tree view.
Figure 8-122. RMON History Control
History Entry No. — Entry number for the History Control Table page.
Source Interface — Port or LAG from which the history samples were taken.
Owner (0-20 characters) — RMON station or user that requested the RMON information.
Max No. of Samples to Keep (1-65535) — Number of samples to be saved. The default value is 50.
Current No. of Samples in List — The current number of samples taken.
Sampling Interval (1-3600) — Indicates in seconds the time that sampl s are taken from the ports.
The possible values are 1-3600 seconds. The default is 1800 seconds (30 minutes).
Remove — When selected, removes the History Control Table entry.
Adding a History Control Entry
1
Open the RMON History Control page.
2
Click Add.
The Add History Entry page opens.
3
Complete the fields in the dialog.
4
Click Apply Changes.
The entry is added to the History Control Table.
316
Viewing Statistics