Current MDI/MDIX— The currently configured device MDI/MDIX settings.
LAG — Specifies if the port is part of a LAG.
Defining Port Parameters
1
Open the Port Configuration page.
2
Select a port in the Port Field.
3
Define the remaining fields.
4
Click Apply Changes.
The port parameters are saved to the device.
Modifying Port Parameters
1
Open the Port Configuration page.
2
Select a port in the Port Field.
3
Modify the remaining fields.
4
Click Apply Changes.
The port parameters are saved to the device.
Displaying the Port Configuration Table:
1
Open the Port Configuration page.
2
Click Show All.
The Ports Configuration Table opens:
216
Configuring Device Information