Dell PowerConnect 5324 User Manual page 276

Defining Link Aggregation Global Parameters
1
Open the LACP Parameters page.
2
Complete the LACP System Priority field.
3
Click Apply Changes.
The parameters are defined, and the device is updated.
Defining Link Aggregation Port Parameters
1
Open the LACP Parameters page.
2
Complete the fields in the Port Parameters area.
3
Click Apply Changes.
The parameters are defined, and the device is updated.
Displaying the LACP Parameters Table
1
Open the LACP Parameters page.
2
Click Show All.
The LACP Parameters Table opens.
Configuring LACP Parameters Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring LACP parameters
as displayed in the LACP Parameters page.
Table 7-72. LACP Parameters CLI Commands
CLI Command
lacp system-priority value
lacp port-priority value
lacp timeout {long | short}
show lacp ethernet interface
[parameters | statistics |
protocol-state]
276
Configuring Device Information
Description
Configures the system priority.
Configures the priority value for physical
ports.
Assigns an administrative LACP timeout.
Displays LACP information for ethernet
ports.