Dell PowerConnect 5324 User Manual page 268

Assigning VLAN Protocol Group Settings
1
Open the Protocol Group page.
2
Complete the fields on the page.
3
Click Apply Changes.
The VLAN protocol group parameters are defined, and the device is updated.
Removing Protocols From the Protocol Group Table
1
Open the Protocol Group page.
2
Click Show All.
The Protocol Group Table opens.
3
Select Remove for the protocol groups that need to be removed.
4
Click Apply Changes.
The protocol is removed, and the device is updated.
Defining VLAN Protocol Groups Using CLI Commands
The following table summarizes the equivalent CLI commands for configuring Protocol Groups.
Table 7-69. VLAN Protocol Groups CLI Commands
CLI Command
map protocol protocol [encapsulation]
protocols-group group
The following example maps ip-arp protocol to group "213":
Console (config)# vlan database
Console (config-vlan)# map protocol ip-arp protocols-group 213
268
Configuring Device Information
Description